Wafr Liquid-Filled Distribution Transformers provide reliable and efficient voltage transformation for utility, industrial, commercial and infrastructure applications.
Designed for Canadian 60 Hz power systems, the transformers are available for common primary distribution voltages including 4.16, 12.47, 13.2, 13.8, 24.9 and 34.5 kV.
For Canadian applications, Wafr transformers are offered with natural ester insulating fluid: a less flammable K-class fluid with a fire point above 300 °C, UL-classified / FM Approved.

Specification
Configuration
Typical Capacity
45 to 3,000 kVA
Primary Voltages
4.16 to 34.5 kV
Secondary Voltages
600Y/347 · 480Y/277 · 208Y/120 V
Frequency
60 Hz
Insulating Fluid
Natural ester liquid
Cooling
ONAN
Windings
Copper or aluminum
Core Technologies
Laminated silicon-steel, low-loss grain-oriented, wound-core or amorphous-core construction.
Natural Ester Fluid
Less flammable K-class fluid with a fire point above 300 °C, UL-classified / FM Approved.
Canadian Efficiency
Designed and tested to applicable Canadian energy-efficiency requirements.
Available core configurations include:
Key Features
| Parameter | Available Ratings |
|---|---|
| Type | Liquid-filled distribution transformer |
| Phases | Three-phase |
| Frequency | 60 Hz |
| Typical capacity | 45–3000 kVA |
| Primary voltages | 4.16 / 12.47 / 13.2 / 13.8 / 24.9 / 34.5 kV |
| Secondary voltages | 600Y/347 V 480Y/277 V 208Y/120 V |
| Other secondary voltages | Available |
| BIL (Basic Impulse Level) | 95 kV for the 15 kV class 150 kV for the 34.5 kV class |
| Cooling | ONAN |
| Windings | Copper or aluminum |
| Insulating fluid | Natural ester liquid |
| Taps | De-energized taps standard |
| Typical connection | Delta-Wye grounded |
| Installation | Indoor / Outdoor |
| Efficiency | Canadian energy-efficiency compliant |
Wafr liquid-filled distribution transformers are designed and tested to applicable Canadian energy-efficiency requirements.
High-efficiency and optimized total-ownership-cost configurations are available for utility and industrial customers.
Applicable standards include: